STONET (ST110GHPDI-2G-130) 8 PORT POE 10/100 2 PORT UPLINK 10/100/1000 130W SWITCH EMNİYET KİLİTLİ
STONET (ST110GHPDI-2G-130) 8 PORT POE 10/100 2 PORT UPLINK 10/100/1000 130W SWITCH EMNİYET KİLİTLİ
Sipariş Kodu35228
Stok KoduE35228
MarkaSTONET
Stok Stok : 20+

(ST110GHPDI-2G-130) 8 PORT POE 10/100 2 PORT UPLINK 10/100/1000 130W SWITCH EMNİYET KİLİTLİ

Bu ürünü paylaş:
Ürün Detayları
ST110GHPDI-2G-130
8FE PoE+2GE Uplink PoE Switch
  • Attached safety lock, more stable.
  • 8* 10/100M PoE ports+2* 10/100/1000M uplink ports.
  • Internal 130W power supply with up to 30W PoE output per port.
  • Durable steel housing for better heat dissipation.
  • Support IEEE 802.3af/at standards, compatible with powered devices (PD) that meet IEEE 802.3af/at.
  • All ports support auto MDI/MDI-X function.
  • Equipped with a convenient DIP switch that can be easily switched between Normal mode, Extension mode, and AI Watchdog mode.
Specification
LED Indicators

Power Indicator

On

The switch is powered on.

 

Off

The switch is powered off.

POE / Uplink Indicator (Link/ACT)

On

The corresponding port is connected to a network device but no activity

 

Flashing

Data is transmitting through the corresponding port.

 

Off

No device is connected to the corresponding port.
Hardware

Button

1* Dip Switch

Ports

8*100Mbps POE ports

2*1000Mbps uplink ports

Backplane Bandwidth

5.6 Gbps

MAC Address Table

4K

Maximum POE Output Power

120W

Network Media & Transmission Distance

1000BASE-T: UTP category 5, 5e, 6 or above cable (≤ 100m)

100Base-TX:  UTP category 5, 5e, 6 Category 5 (Cat5) or higher UTP/STP cables (≤100m)

10Base-TX: UTP category Category 6 (Cat6) or higher UTP/STP cables (≤250m)

Tips:The actual transmission distance is related to the connected terminal/network cable type and condition; it is recommended to use Category 6 cable preferentially.
Software

Basic Functions
  • Complies with IEEE 802.3 Ethernet and IEEE 802.3u Fast Ethernet protocol standards
  • Compatible with IEEE 802.3af/at compliant powered devices (PD)
  • Compatible with certified non-standard powered devices (PD)
  • Supports store-and-forward switching
  • Supports full power output
  • Supports automatic MAC address learning and aging
  • Extended cable transmission,supports long-distance monitoring power supply
  • Supports IEEE 802.3X full-duplex flow control and Backpressure half-duplex flow control

Ethernet Protocols and Standards
  • IEEE 802.3 10BASE-T Ethernet
  • IEEE 802.3i 10BASE-T Ethernet
  • IEEE 802.3u 100BASE-TX Fast Ethernet
  • IEEE 802.3ab 1000BASE-T Gigabit Ethernet
  • IEEE 802.3af/at, Power over Ethernet
  • IEEE 802.3x Flow Control

Data Transfer Rate

POE port :10/100M full-duplex/ half-duplex modes

Uplink port :

10/100M full-duplex/ half-duplex modes

1000M full-duplex mode
Environmental Requirements

Temperature
  • Operating Temperature:0? ~ 40?
  • Storage Temperature:-40? ~ 70?

Humidity
  • Operating Humidity:10% ~ 90% RH(non-condensing)
  • Storage Humidity:5% ~ 90% RH(non-condensing)

Altitude
  • Operating: Max 6500 feet (2000 meters)
  • Storage: Max 6500 feet (2000 meters)
Lightning Surge Protection

Differential Mode

2KV

Common Mode

4KV
Physical Dimensions

Dimensions

(W x D x H)

186mm*150mm*43mm(7.32*5.91*1.69 in)
Others

Stacking Limit

Maximum of 4 layers when fully packaged

Humidity

5%~90% RH(non-condensing)

Storage Temperature

-40? ~ 70?(-40°F ~158°F),with the most suitable storage condition being room temperature considering humidity

Storage Precautions

Store in a clean,ventilated environment free from corrosive gases,flammable,explosive,and other hazardous chemicals.Keep away from heat sources and sources of strong mechanical vibration

Storage Period

Under the above conditions,the product can be stored for one year.It is recommended to re-inspect and test the product after two years before use